Riley Blake Challenge

I have to admit that I had a hard time deciding what to do with this year's Riley Blake challenge  using The Cottage Garden by The Quilted Fish.  I wasn't able to get in on the fabric giveaway (it was GONE by the time I got home from work) and my LQS only had the green/pink colorway, which just didn't inspire me very much.  To top it off, I had forgotten when I bought the fabric that I had split the half  yards with a friend and ended up with fat quarters - which is fine, except that with so little fabric (and the requirement being for all Riley Blake fabrics) - I had trouble deciding what to do.  I've seen some really cute things made from this fabric, but honestly, I was stumped.

In the end, I fell back on this tote I designed at Sewing Summit in 2011 - the One Hour Fat Quarter Tote.  I used headliner foam instead of fleece to line the bag, and made it just a bit larger than the original design.  I used a tab of color at the top of the pocket that wasn't in the original design, and I used a Riley Blake gingham from another line for the lining.

Overall, it turned out pretty well.

One of the requirements was that you do something you've never done before.  I had some quilted pieces left over from the tote, so since I've done so much traveling this summer, I decided to make luggage tags.  Having just returned from the last trip of the summer, I can testify that they worked pretty well.

First Finishes for August!

If you saw my post from August 1st, you will know that I have proclaimed August to be Finish It month. Well, here it is the 13th already and until now I didn't have a thing to check off my list.  I still don't, really, since these bags weren't on the list, but they WERE languishing in the WIP pile, and they are now finished, so I'm going to count them.  It is, after all, my list, and I can count them if I want to, right? 

My list, my rules!

I found several pieces of decor weight remnants at JoAnn's and brought them home.  I thought they were pretty fabrics (although you would never see them on a chair at my house...  pillows?  maybe.)  Anyway, I brought them home and then one night after work they were staring at me and just screamed to be made into bags.  So I got busy and cut them out.  I even made two of them and sent them on to new homes.

But the other two were just moping there in the WIP basket all this time.  So finally, I sat down yesterday and finished them up.

It's really not difficult when the pieces are already cut.  It's just a matter of getting them out and doing it, isn't it?  They are a variation of my One Hour FQ Tote, so they don't even take that long to make.  My One Hour FQ Tote pattern is really my go-to pattern for tote bags.  It's easy, it goes together quickly, and I always like the results.

So I don't have an immediate need for these bags.  The first two were sent out with swap items, and I may do that with these.  My friend Krista suggested that I put them in my Etsy shop and see what happens. 

What do you think?

Countdown to Christmas

Do you realize that it's just 6 weeks until Christmas???  Whew!  I'm certainly not ready.  Not emotionally ready, not to mention actually doing anything about it yet.   But I did manage to make a couple of things that are a little Christmas-y.  This Flurry apron is kind of cute (please don't look at the model).  And easy too.  Only one fat quarter and some yardage for the pocket, waistband and ties.  A half yard of each and about an hour made 2 aprons.  Easy peasy.

And I managed to make another of my 1-hour FQ Totes.  This is the last of the Pink Dazzle I bought at Sewing Summit.  I have one FQ left, so maybe I can find something fun to do with it.  I'm not too sure about the practicality of a basically white tote, but I really like it, especially for winter.

Isn't this fabric fun?

And check out the inside.  I probably wouldn't have used these together if they hadn't been all that was left, but I really like it.  It gives it such a fun feel.

So, two gifts, less than an hour apiece.


Maybe I can get Christmas under control after all.

1 Hour Fat Quarter Tote - A Tutorial

The 1 Hour Fat Quarter Tote in Pink Dazzle by Adorn It

This is a tutorial for an oh-so-quick tote bag which is made entirely from fat quarters and can be made - from start to finish - in approximately 1 hour. It has convenient pockets on the outside and holds a ton of stuff.  I'm planning on making several for Christmas gifts this year.  How about you?

(OK, in the interest of full disclosure - I just made another one and it was an hour and a half from cutting to the last stitch, including time to wind the bobbin, so sewing time was - well - not much more than one hour.) 

Supplies: 
5 fat quarters
batting equal to 2-1/2 fat quarters (scraps work great!)
cutting mat and rotary cutter
general sewing supplies such as sewing machine, thread, iron, etc.


 Before you start:


This tutorial assumes that quarters are generally 18 x 22 inches, give or take.   If yours are a different size, you may have to adjust the size of your bag slightly.  This will mostly involve adjusting the lining pieces to make sure the lining fits the outside of your bag.  This pattern is very forgiving, and will accommodate a lot of variation, as long as you keep your tape measure handy when you are ready to insert the lining.

You may wish to square up your fat quarters before you begin.

You may find it helpful to press your FQs before you start.

Be sure to cut off all selvages.

All seam allowances are 1/2" unless otherwise mentioned.

The amount of quilting you do will partially determine how much time this project takes.  I do not quilt these bags heavily; I just do enough quilting to enhance the design and hold the layers together.

Wind several bobbins before you start so you don't have to stop to wind the bobbin.

RST = Right Sides Together

Cutting:

FQ #1 (sides)

Lay your FQ on your cutting mat horizontally.  Cut in half.  You should now have two pieces approximately 11" x 18".

Cut each piece in half again, making 4 pieces approximately 5-1/2" by 18".

Set aside.

FQ #2 (center)

Lay your fabric on your cutting mat horizontally.  Cut two pieces 9" wide.  You should also have a 2" piece left over (not shown).

Set aside. 

FQ #3 (pockets and handles)

Lay your fabric on your cutting mat horizontally.  Cut a piece 9" wide.  Cut this piece in half vertically.  You should now have 2 pieces 9 x 9 inches.

From the other piece, which should be approximately 13" by 18", cut two pieces 3-1/2" wide by 18" long.  You will have a piece approximately 4" wide x 18" long left over. 

Set aside.

FQs #4 and 5 (lining and handles)

From each FQ -

Lay your FQ horizontally on the cutting mat.  Cut one 3-1/2" by 18" piece. 

Set the rest aside until you are ready to insert the lining.

Batting
Cut a piece of batting to fit each of the 4 pieces of FQ#1, the 2 pieces of FQ#2, and two of the handle pieces from FQ#3.


The Outside of the Tote:

Step 1:  Quilting

Match your 4 pieces of FQ#1, the 2 pieces of FQ#2 and 2 of the 3-1/2" by 18" pieces with their batting counterparts and quilt as desired.  I do not do much quilting here - just enough to hold the fabric to the batting and give it some strength. 

Step 2:  Pockets

Take one of the 9" by 9" pieces of FQ#3 and fold one edge over 1/2".  Press.  Fold it over again and press.  

 

Stitch close to the edge.

Fold the opposite edge over 1/2 inch and press. (Hint:  Do all the pressing all at once to save time moving back and forth to the ironing board.)

Lay the pocket piece on top of one of the quilted 9" by 18" pieces of FQ#2.  Place the single fold edge 2-1/2 inches from the edge of the quilted piece and pin in place.  

Stitch close to the edge.  Stitch again exactly on top of the previous stitching for strength.  You may wish to stitch up the sides close to the edge to hold your pocket in place.  (Hint:  Use your machine's thread cutter rather than reaching for the scissors to cut your threads - it's lots faster.)

On the other 9" by 9" piece of FQ#3, fold one edge over 1/2" and press.  Fold it over again and stitch close to the edge.

Fold the opposite edge over 1/2" and press.

With a water soluble or chalk marker, draw a line down the middle of this piece from the stitched edge to the folded edge.

As you did with your other pocket, place the pocket piece on the 9" by 18" quilted piece of FQ#2 and pin in place 2-1/2" above the edge of the quilted piece.  Stitch close to the single fold edge.  Stitch again exactly on top of the previous stitching for strength.  You may wish to stitch the sides close to the edge to hold it in place.

Now, stitch down the line you drew in the center of the pocket.  Stitch again exactly on top of the first stitching for strength.

Step 3:  Outer panels

Place a quilted 5-1/2" by 18" FQ #1 piece RST along both sides of the center pocket panel you just created in Step 2 and sew.  Repeat for the other center pocket panel.  You should now have 2 pieces that look like this:

Your outer panels are finished!

Now, place the two outer panels RST and sew the side seams. 

Stitch the bottom edge together.  Stitch again exactly on top of the previous stitching for strength.  (HINT:  when stitching twice, don't lift the needle - turn the fabric around and just sew in the opposite direction.)

 Snip the corners to reduce bulk and fold the seams in opposite directions.

Match the bottom seam to the side seam, forming a point, as shown.  I roll the seams between my fingers until they match exactly.  Pin along the seam line to hold it in place.

Measure up 1-3/4" from the point and draw a straight line across the corner.  (I forgot to take a picture of this process on the outside panel, but the process is the same for the lining, so this photo will have to do.)  Stitch along this line.  Repeat for the other corner.

Your bag should now have a bottom and corners that look like this.

Step 4:  Handles

Take one of the 3-1/2" x 18" quilted pieces and match it with one of the 3-1/2" x 18" unquilted pieces.  Sew lengthwise down both sides.

Turn right side out.  This piece was wide enough that I didn't need a safety pin or tool to turn it.

Press flat.  Repeat for other handle.

Top stitch both sides of each handle 1/4" from the edge to prevent the handle fabrics from twisting in use.

With the quilted side down, center the handle over the center panel seam on the outside of your bag.  (I do this by folding the handle piece in half and placing the fold over the seam line - thus, no need to measure!)  Pin in place.  Pin the other side of that handle piece to the other center panel seam on the same side of your bag. 

Stitch handle to bag with a 1/4" seam.  Stitch again for security.  Repeat for all four handle ends.

Step 5:  Lining

Measure the outer bag from side seam to side seam.  Add 1 inch.  If necessary cut each of your lining pieces to that width.  Set any left over scraps aside.

Sew the sides and bottom of the lining as you did for the outside of your tote using 1/2" seams. 

Snip the corners and fold the seams opposite directions.  Match the side seam to the bottom seam and pin together.

Measure up from the point 1-3/4" and draw a line across the point.  Stitch on the line.  Your bag lining should now have a corner that exactly matches the outside of your bag. 

If you wish to press your seams, now is the time.

Step 6:  Finishing

With the bag lining wrong side out and the bag right side out, place the bag inside the lining matching the side seams.  Pin the bag and the lining together at the side seams.

Pin around the raw edge from the inner corner of one handle all the way around to the inner corner of the same handle on the opposite side of the bag. 

Using a 1/2" seam, stitch the bag to the lining from the inner corner of one handle all the way around to the inner corner of the same handle on the opposite side of the bag.  Leave the area between the  two edges of the handle open for turning.

Reach inside the bag through the open area and pull the bag right side out.  Stuff the lining down inside the bag.  Press.  Turn the raw edge under and pin the open area closed.

Beginning at one side seam, top stitch all the way around the bag close to the edge.

Beginning at the same side seam, top stitch all the way around the bag again 1/4" from the first stitching.  (Hint:  Don't pull the fabric out from under the needle or cut your threads, just move the fabric over 1/4" and do the second stitching, then cut your threads all at once.)

Congratulations!  Your bag is finished.  I guarantee you it took me a lot longer to write this tutorial than it did to make the bag.  I have tried to document the process accurately, but if you notice any errors, or if something isn't clear or doesn't make sense, please let me know.

 

Thanks for following along with me.  I hope you enjoy it.  If you make one, please let me know.  I'd love to see photos.

Happy Wednesday!

I wanted to show you all a close up of my latest 1 hour FQ Tote that is going to Dawn, the winner of the Sewing Summit Loot giveaway. I really like this one. Frankly, I'm having a little trouble giving it up.  But I said I would, and I will.

I began to use this one to write the tutorial, but had a little glitch and forgot to take pictures of the final couple of steps.  Guess that's what I get for working on it late at night.  If it's not too confusing, when you read the tute, you may see the fabrics change in the final steps.

Here is a view of the inside.  I really like how the fabrics work together without being matchy-matchy.  And it's a great size to carry everywhere.  I use the one I made myself at Sewing Summit a lot.

And look what came in the mail the other day.  I registered for a giveaway from Delish Magazine, an online e-zine, and I won this cute little book.  I have only had a brief chance to flip through the book, but some of these projects look really fun.  I plan to give a few of them a try very soon.

And I have to make a couple of items for the local guild booth at the Arts Festival.  What do you think of this Christmas tree skirt?  It is leftovers from a Flurry jelly roll by Kate Spain.

And I made a pair of stockings to go with it.  The cuff is leftover from BD#2's pillow that we made last New Year's.  Jelly rolls are so amazing.  I am always just blown away by all the things you can do with them.

And since I had the camera out, I finally got around to taking pictures of my new pot holders from Leila in Potholder Pass 9.  The theme was houses, and she stalked me well enough to know that my kitchen is blue and yellow.  Too cool.  Now I can get rid of some of the unsightly things that have been living in the drawer for 20 years - you know, the ones with burn holes and stains?  Yeah, those.

Anyway, that's what's going on today in my neck of the woods.  Thanks for dropping by.